Cream of the Crop 26

home *** CD-ROM | disk | FTP | other *** search

/ Cream of the Crop 26 / Cream of the Crop 26.iso / printer / jcosub26.zip / QUICKREF.DOC < prev next >

Wrap

Text File | 1997-05-03 | 13KB | 381 lines

JACOsub Script Format - Quick Reference ======================================= This document serves as a brief summary to JScripts.doc. Refer to JScripts.doc for complete details. SCRIPT COMPILER COMMANDS ======================== # (followed by a space) Comment. The line will be ignored. #C[LOCKPAUSE] <time> Force clock to pause at time specified while playing. Keypress resumes. #D[IRECTIVE][n] <directive string> [optional_name] Change default directive n. n=0 (overall directive) if n omitted. n may range from 0 to 30. The optional_name can be used in timed lines in place of the default directive code. A directive name in a timed line must be enclosed in square brackets [], but it should not contain brackets in the original name definition. #F[ONT] <n> <fontname.font> <h> [CLEAN or QUICK&DIRTY] [Y/X] Set font n to fontname.font, h pixels tall. n may range from 0 to 9. Mono fonts are always QUICK&DIRTY (rendered fast). For face colors other than 3, color fonts default to CLEAN (rendered one character at a time), unless QUICK&DIRTY is specified. Y/X is used to change the aspect ratio from 1/1 (AmigaDOS 2.0+). #H[RES] <HIRES or SUPERHIRES> Set resolution mode expected to be used in the script. #I[NCLUDE] <time> <filename> Include script file <filename> into the current script, offsetting the new script's start time by the time specified. Offset cannot be negative. Offset units depend on time units set by #TIMERES. #F, #P, #Q, and #R in an included script will be ignored. The effects of #D, #S, and #T are passed down into included scripts. #P[ALETTE] <color> <r> <g> <b> [palette] For specified color register, set RGB intensities (0 to 15). palette defaults to 0 (primary palette), but may be 0 through 9. Use palettes 1 - 9 with the CP directive. #Q[UANTIZE][n] Eliminate timing gaps between subtitles of less than n time units. Number of time units per second is specified by #TIMERES. #R[AMP] <seconds.units> Adjust script play for time drift by changing the script's overall running time. Positive ramp adjustments lengthen the play, negative adjustments shorten it. Time units are determined by #TIMERES. #S[HIFT] <[[hours:]minutes:]seconds.units> Shift all times in script by the amount specified. Positive shifts delay time events, negative shifts advance them. #T[IMERES] <n> Set time resolution of script to n units per second. Default is 30 if this command does not appear in the script. ESCAPE CODES TO EMBED IN TITLES =============================== \ (If last character in a line) Concatenate. Assume next line in script continues current title. Leading and trailing spaces in concatenated lines are ignored. \n Newline. Use to split a title text into multiple lines. \n codes override wordwrapping, but the resulting text substrings might still be individually wordwrapped if needed. \{ Display a left brace, which is normally used to begin a non-displaying comment embedded in the title. \~ Display a tilde, which is normally used to create a "hard" non- wrappable space. \\ Display a backslash, which is normally used to begin an escape code. \D Insert date here (DD MMM YYYY format). \T Insert time here (24-hour HH:MM format). \N Normal. Display text that follows in "normal" style. Equivalent to the SN directive. \I Italics on. Display text that follows in italics. Equivalent to the SI directive. \i Italics off. \B Boldface on. Display text that follows in boldface (sometimes useful). Equivalent to the SB directive. \b Boldface off. \U Underline on. Underline text that follows (not useful). Equivalent to the SU directive. \u Underline off. Note: /I, /B, and /U were mutually exclusive prior to version 2.6, now the styles can be combined. \N turns off all styles. \Cn Color n. Use face color n for text that follows. n is a hexadecimal digit ranging from 0 to 9 and A to F (or a to f). Equivalent to the CF directive. \Fn Font n. Use font n (0 to 9) for text that follows. Equivalent to the F directive. TITLE DIRECTIVES ================ Directives occur after the stop time is specified. You may omit the title directive if you title begins with a non-alphabet character (such as a left brace for a {comment}), in which case the directive defaults to D. Defined directives and their names [enclosed in brackets] are interchangeable. Vertical positioning -------------------- VA Vertical continuation Above previous title, using previous title's vertical positioning setting. Opposite of VU. VB[n] Vertical Bottom, offset from bottom of display by n pixels. n may be omitted (default n, usually 16, can be set with the #D command). VHn Vertical line Height n% of normal. VH200 makes double-spaced lines. VL[n] Vertical Line position n. Line height depends on font size. If n is negative or omitted, vertical line position will be where the previous timed line started. VM[n] Vertical Middle. Center vertically between VTn and VBn position. n=0 by default, otherwise shifts block up or down n text lines. VPn Vertical Pixel position n. Baseline of font will be n pixels from top of display. VSn Scroll text up at speed n (-6=slowest, 4=fastest). n is frames per raster line if n<0, or raster lines per frame if n>0. VT[n] Vertical Top, offset from top of display by n pixels. n may be omitted (default n, ususally 16, can be set with the #D command). VU Vertical continuation Under previous title, using previous title's vertical positioning setting. Opposite of VA. Horizontal positioning ---------------------- Margins: HLn Horizontal Left margin n% of display width from left edge. HRn Horizontal Right margin n% of display width from right edge. Text justification: JC Justify Center. Text is centered within HLn - HRn constraints. JF[:p] Justify Full. Aligns left and right edges with the ends of the widest line in the text box. Last line in block is unaffected, except to position it Left, Right, or Center (default), when :p is :L, :R, or :C, respectively. JF:U means Unconditional justification -- ALL lines in the block will be stretched to fit exactly within the margins. JL Justify Left. Align left edge of text at the HLn margin position. JR Justify Right. Align right edge of text at the HRn margin position. Block justification: JBC Justify Block Center. Position the text, after wordrwapping, so that it is centered within the margins, preserving the text justification. To get "AnimEigo" positioning, use JBC with JL. JBF Justify Block Full. Cancel the effect of any JB directive if one happens to be in use as a default directive. JBL Justify Block Left. Position the text block at the left margin. JBR Justify Block Right. Position the text block so that the right edge is at the right margin, preserving the text justification. Word wrapping: W0 Disable automatic word wrapping. Warning: text may overflow screen boundaries. W1 Automatic "smart" word wrapping (default). Wrap text so that the screen area consumed by the title is minimized. W2 Automatic "stupid" (generally known as "greedy") word wrapping. Fit as much text into a line as possible without regard to appearance or screen space consumed. Fonts ----- Font rendering: Fn Use font n (0 - 9) for the title text. FQ Force title to be rendered Quick&Dirty. Mono-color fonts and colorfonts using color 3 are always quick anyway. FC Force title to be rendered Clean (1 character at a time) to avoid font shadow overlap interference problems.rendering. Mono-color fonts and colorfonts using color 3 will still be rendered fast. FD Force Default text rendering. Used to override a global #DFC or #DFF command. FBn Use blitter (n=1) to copy overlapping time range title imagery between buffers, or generate such titles afresh (n=0) on each buffer. FOn[:a] Generate Font Outline n pixels wide, optionally use antialias color a. Warning: This slows the program down considerably. FSdn Generate Font Shadow in direction d (one of 8 compass directions N, S, E, W, NW, NE, SW, SE), n pixels deep. Font style (may also be set with \ codes in the title text): SN Normal style (typical default). SI Italic. SB Bold (using the JACOsub font, this looks best with color 3). SU Underline (ugly! Not recommended). Color CFn Color Fontface n. CBn Color Background n. Screen is cleared to color n prior to rendering anything to it. Useful for creating a genlock-opaque background if n is nonzero. CPn Load Color Palette n (0 to 9, set with #PALETTE command) at the start time of this title. If you can see the palette change after the display is updated, precede your alternate palette lines with a "dummy" short-duration blank screen (containing a hard space) using your alternate palette. CS[L]n[:s[:c]] Color Shaded box with n-pixel margin around text, using shade style :s (:0=pattern, :1=solid color), using optional color :c (normal default is :2 [black], can be re-set with a #D command). Titles that overlap in time AND use the CS directive will be surrounded by a SINGLE box; if CSL is used, a box will appear around individual lines (including segments resulting from wordwrapping). n=0 disables shading. Genlock fader control --------------------- GBn[Tm] Genlock Background n% of saturation in m/60 seconds. m=0 if Tm is omitted. n=0 is a transparent background. GGn[Tm] Genlock Graphics n% of saturation in m/60 seconds. m=0 if Tm omitted. n=100 is full-on graphics. Note: Do not use the G directives in the global #D command. Special effects --------------- Default speed [s]=8 for all effects; [s] may range from 1 to 64. If [s]=0 or [s]=?, the speed will be random. d=direction: V=vertical, H=horizontal, O=open, C=close, L=left, R=right, U=up, D=down EBd[s] Blinds; d may be V or H. ED[s] Dissolve. Three speeds: slow (s=0,1), medium (s=2,3), faster (s=4). EEdd[s] Eyelid; dd may be VO, VC, HO, or HC. EId[s] Iris; d may be O or C. EN Normal transition (default). New view replaces old. Also E0. EPn[:s] Palette fade from current palette to palette n; [:s] may be 0 to 255. EP+a[:b[:p]] EP-a[:b[:p]] Palette cycle forward (+) or backward (-) from colors a to b (default max color index) using period [:p] video fields (1-255, default 2) per cycle step. ERd[s] Roll old view off while rolling new view in; d may be U, D, L, R. ESd[s] Scroll new view up (d=U) or old view down (d=D). EWd[s] Wipe; d may be U, D, L, R. E?[s] Random transition; s may also be 0 or ? for random speeds. Directives using the title string for parameters ------------------------------------------------ Note: Do not use R directives in the global #D command. RLB <ILBM file name> [<x offset %> <y offset %>] Load a background IFF brush into the video screen for the time interval specified by this line's start and stop time. Current screen colors will be used; the IFF colors will be ignored. x and y are percents of screen width and height to offset the center of the bitmap from the center of the screen. Through overlapping time ranges, as many as 40 images may be loaded onto a single screen, memory permitting. Text can appear concurrently with the bitmaps. RLG <ILBM file name> Load an IFF graphic file into its own screen, using the file's own resolution and colors. Text cannot appear concurrently. RDB <left> <top> <right> <bottom> Draw a solid rectangle in the current font color in units specified as percentages of display width and height. RX <ARexx script name> Execute the ARexx script name that follows the RX directive. Do not specify other directives on the same line, and have no more than one RX directive per time event. Default directives ------------------ D or D0 Default 0verall. To be used if no other directives are used. The behavior of D can be set with the #D command. Dn Default alternate n (1 - 20). Use these for "shortcuts" to long directive strings that you like to use repeatedly. Set with the #D command.